U-Pipe Evacuated Tube Solar Collectors are smaller and more compact than SunMaxx Heat Pipe Evacuated Tube Solar Collectors. While the two collectors have nearly identitcal efficiency ratings, the U-Pipe Collectors produce lower amounts of BTUs. However, there are several key advantages to U-Pipe Evacuated Tube Solar Collectors. These Include:
- Extremely Low Price
- Additional Installation Versatility
- Compact Size for Tight Installation Locations
SunMaxx U-Pipe Solar Collectors cost even less than SunMaxx Heat Pipe Evacuated Tube Solar Collectors, which are already one of the industry's most affordable lines of solar collectors. Additionally, U-Pipe Collectors can be installed perfectly vertical or horizontal, allowing for a wider variety of installation options, which allow these solar collectors to be used where other collectors can not be used. U-Pipe Solar Collectors should be used in locations where there is no choice but to install the solar collectors vertically or flat, such as on the top of a flat roof building where tilt mounting is not an option due to space limitations, or as an overhang from buildings where there is no roof space to mount the solar collectors.
This combination of performance, versatility and incredible pricing has made SunMaxx U-Pipe Solar Collectors one of the most popular and trusted solar collectors in our inventory.
Each SunMaxx 30 U-Pipe Evacuated Tube Solar Collectors includes:
- 30 Revolutionary SunMaxx Evaucated Tubes
- 30 U-Pipe Style Copper Heat Pipes
- SunMaxx 30 Face Frame w/Assembly Hardware Kit
- SunMaxx 30 Flush Mount Hardware for Pitched Roofs
- 10 Year SunMaxx Limited Warranty
- Live Support via Phone
Recommended Components to Create a Complete System :
- 40 or 80 Gallon Solar Hot Water Storage Tank
- Or 20 Plate Brazed Plate Heat Exchanger
- Goldline Differential Temperature Controller
- AC or DC/PV Powered Circulator Pump
Assembly Time: A single SunMaxx 30U Solar Collector can be assembled and installed in about 1.5 hours.
| Specifications |
SunMaxx 30 U-Pipe |
| Part Number |
SunMaxx-30U |
| Number of Tubes |
30 |
| Tube Length (nominal) |
59" (1500mm) |
| Tube Diameter |
1.85" (47mm) |
| Copper Heat Pipe Diameter |
0.32" (8mm) |
| Copper Heat Pipe Thickness |
0.023" (0.6mm) |
| Dimesions (assembled) (W x L) |
92" x 66" |
| Aperture Area |
28.7 Sq Ft |
| BTU Output (Clear Skies) |
3,850/hour |
| Ships/Arrives |
Freight/On Pallet |
| SunMaxx Direct |
|
| Buy Today! |
888-SOLAR-11 |
View our Comparison of Heat Pipe and U-Pipe Solar Collectors.
| |
For More Information or to Place an Order:
|
|
