The SunRack 3EV is designed with 2 goals in mind. First, to shorten your installation time by eliminating the need for assembling multiple tilt frames to install your SunMaxx Evacuated Tube Solar Collectors. Each SunRack 3EV is designed to hold up to 3 SunMaxx 20 or 25 Evacuated Tube Solar Collectors, but will work with any SunMaxx Evacuated Tube Solar Collector.
Second, the SunRack 3EV is designed to lower your installation costs by lowering the amount of material you need to purchase to get the job done, and by shortening the time spent on installation.
The SunRack 3EV must be combined with either the SunRack-SB (short back legs) or SunRack-LB (long back legs) depending on the tilt required for installation at your location. Additionally, the SunRack 3EV10 Extension adds an additional 10 ft of collector mounting space on each of your SunRack 3EVs. The 10 ft extension is an optional component that is ideal for many installations depending of the size of the Solar Collector array.
SunMaxx estimates that the SunRack 3EV will cut your installation time by 1 hour for every collector you install using the SunRack. And, every component of the SunRack 3EV Series comes with Silicon Solar's 5-Year Warranty, and is proudly Made in the USA.
SunRack 3EV Multiple Collector Installation Frames work with all SunMaxx Evacuated Tube Solar Collectors, including:
- SunMaxx-10
- SunMaxx-20
- SunMaxx-25
- SunMaxx-30
- SunMaxx-20U
- SunMaxx-30U
 |
The SunRack 3EV for a faster and more cost-effective installation of your SunMaxx Evaucated Tube Solar Collectors. By allowing up to 3 SunMaxx 20 or 25 SunMaxx Evacuated Tube Solar Collectors to be installed on the same Tilt Mount Frame, the SunRack 3EV is the perfect choice for every SunMaxx installation. The SunRack 3EV features:
- (1) 20 foot strut
- (1) Splice
- (3) Pedastal Mounts
- (3) 5/8 x 12" Threaded Rods
- (6) 2 x 2" Dog Ears w/ .406 & .6875" Holes
- (6) 5/8" Spring Nuts
- (9) 5/8" Nuts
Part No.: SunRack-3EV
Installers/Dealers: Call for Pricing |
| |
|
 |
The SunRack-SB is our Short Leg Mounting Base for the SunRack 3EV Multiple Collector Installation Frame. Either the SunRack-SB or SunRack-LB for installation, and 1 SunRack-SB is sufficient for every SunRack 3EV installed. The SunRackSB features:
- (8) 1 x 1" Angles (Uprights & Cross Braces)
- (2) 1 x 1/8" Flats (Rear Cross)
- (2) Side Brackets (for Uprights)
- (2) 2 x 2" Dog Ears w/ .406" Hole
- (1) Hardware:
- (18) 3/8 x 3/4" Bolts
- (18) 3/8" Nuts
Part No.: SunRack-SB
Availble in: Matte Steel, Aluminum and Stainless Steel
Installers/Dealers: Call for Pricing |
| |
|
 |
The SunRack-LB is our Long Leg Mounting Base for the SunRack 3EV Multiple Collector Installation Frame. Either the SunRack-SB or SunRack-LB for installation, and 1 SunRack-LB is sufficient for every SunRack 3EV installed. The SunRack-LB features:
- (4) 36" 1 x 1" Angles (Uprights)
- (4) 18" 1 x 1" Angles (Cross Braces)
- (2) 97" 1 x 1/8" Flats (Rear Cross Braces)
- (2) Side Brackets (For Uprights)
- (2) 2 x 2" Dog Ears w/ .0406" holes
- (1) Hardware:
- (18) 3/8 x 3/4" Bolts
- (18) 3/8" Nuts
- (18) 3/8 Locks
Part No.: SunRack-LB
Availble in: Matte Steel, Aluminum and Stainless Steel
Installers/Dealers: Call for Pricing |
