Click To Contact SunMaxx Solar Today

TitanPower-ALDH29 V3 Solar Flat Plate Collector

$950.00

SKU: TitanPowerPlus-ALDH29-V3. Category: . Tag: .

* Freight shipping required. Please call a representative to discuss purchase and freight shipping options.

Product Description

Product Documents

Document TypeDownload
DatasheetView Datasheet
SRCC CertificationView SRCC Certification
Install Manual (General)View Install Manual (General)
WarrantyView Warranty
Technical ManualView Technical Manual

Product Details & Specifications

SRCC OG-100 Certification10002034
BTU Output33.5 kBtus per Day
Frame ColorSilver
Glass TypePrismatic
Total Dry Weight92.6 lbs
Gross Dimensions93.2" x 45.6"
Depth3.8"
Gross Area29.5 Square Feet
Aperture Area27.7 Square Feet
Fluid Capacity0.50 Gallons
Recommended Flow Rate0.15-.25 Gallons per Minute
Max. Collectors/Row16
Riser Tube Flow PatternDouble-Header Serpentine
Absorption/Emission95% / 5%
Transmission of Glazing91%
Efficiency82% (based on absorber area)
Max Stagnation Temperature392 F
Max Operation Pressure135.04 psi
Recommended Heat Transfer Fluid40-50% propylene-glycol, (ProtectMaxx fluid ONLY)
Quantity Per Pallet11

The TitanPower-ALDH29 premium flat plate collector is the latest in flat plate technology. This collector is a step ahead with all-new mounting hardware. Combining advanced technologies and manufacturing processes from around the world, the TitanPower-ALDH29 is able to offer cutting-edge performance and premium quality with highly competitive pricing.

Benefits:

  • Easy installation with fewer mounting hardware components
  • Superior Affordability
  • lightweight and versatile laser-welded absorber and aluminum frame
  • Extremely high 82% efficiency

 

Recommended & Required Connection Accessories

ItemRequiredDescription
TitanPower-A-ALDH-V3-ADPKIT-3/4NPTRequiredRequired for connection into each bank of collectors. If a single collector is purchased, then one set is required. Set includes 2- ¾” Male connections, 1- caps, and 1 manual air bleeder.
TitanPowerPlus-A-ALDH-COUPLINGCLAMP-V3Required2pcs required per coupling (below).
TitanPowerPlus-A-ALDH-COUPLING-V3Required2pcs required to connect between collectors.
TitanPowerPlus-A-ALDH-3/4IN-FNPT-BVRequired2pcs required per set of ADP Kits. These valves are used for servicing purposes and flow balancing of each collector bank.
FlowMaxx-A-LRG-CLAMP-LINESETRecommendedUsed to support line set (5/8” – 1” line set). Includes lag bolt, and EPDM / flashing washer for water sealing.
FlowMaxx-A-N66BUV-18INRecommendedUL listed outdoor heavy duty line set and cable supports. Allows for effective, and low cost fastening which meets building code requirements.

Replacement Parts & Safety

ItemQtyDescription
ProtectMaxx-GLYCOL-FG-50PCT-5GNAHigh temp solar glycol, required to not void collector warranty. Pre-mixed to 50%.
FlowMaxx-A-3/4IN-3/4IN-PF-MNAUsing full port ball valve above, use ¾” quick connects, to connect line set directly into the collector bank.

Mounting Options

Flush Mounting on Asphalt Roof or Metal Roof

ItemQtyDescription
ConnectMaxx-TPALDH29-2FM-V3 or ConnectMaxx-TPALDH29-2FM-V22 or 1Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Base mounting aluminum rail or Base mounting rail kit + shafer roof lags. Note the V2 kit includes all hardware required to connect from collectors frame to the roof.
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.
ConnectMaxx-TRUV-AS-MLLFLASH-KIT6When mounting on asphalt or metal roof, where normal shafer bolts from above V2 mounting kit are too wide for rafter. Normal installation on purlin / residential roof.

Flush Mounting on Tile Roof

ItemQtyDescription
ConnectMaxx-TPALDH29-2FM-V3 or ConnectMaxx-TPALDH29-2FM-V22 or 1Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Base mounting aluminum rail or Base mounting rail kit*.Note, some hardware from V2 kit will not be used for mounting to tile roofs (pending installation method).
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.
ConnectMaxx-UV-QMUTM-TILE-V26Allows for mounting to all tile roof types.
XMaxx-HW-M8-40mm-TBolt12T bolts for interconnecting rails
ConnectMaxx-TRHW-M8-HEXNUT12HEXNuts for tbolts

Free Standing Mounting

ItemQtyDescription
ConnectMaxx-TPALDH29-2FS-V21Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Free standing mounting kit. Includes all components for “A-Frame”. Does not include lag bolts for connection into roof material.
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.

Or

ItemQtyDescription
ConnectMaxx-TRUV-1FS-FTLEG-V32Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Front Leg for incline mounting kit (includes lag bolt for roof).
ConnectMaxx-TRUV-1FS-BLEG-V32Rear Leg for incline mounting kit (includes lag bolt for roof).
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.

Related Videos

Related FAQs & Technical Tips

  • There Are No Technical Tips To Display

TitanPower-ALDH29 V3 Solar Flat Plate Collector
The TitanPower-ALDH29 premium flat plate collector is the latest in flat plate technology. This collector is a step ahead with all-new mounting hardware. Combining advanced technologies and manufacturing processes from around the world, the TitanPower-ALDH29 is able to offer cutting-edge performance and premium quality with highly competitive pricing.Benefits:

  • Easy installation with fewer mounting hardware components
  • Superior Affordability
  • lightweight and versatile laser-welded absorber and aluminum frame
  • Extremely high 82% efficiency
 

Recommended & Required Connection Accessories

ItemRequiredDescription
TitanPower-A-ALDH-V3-ADPKIT-3/4NPTRequiredRequired for connection into each bank of collectors. If a single collector is purchased, then one set is required. Set includes 2- ¾” Male connections, 1- caps, and 1 manual air bleeder.
TitanPowerPlus-A-ALDH-COUPLINGCLAMP-V3Required2pcs required per coupling (below).
TitanPowerPlus-A-ALDH-COUPLING-V3Required2pcs required to connect between collectors.
TitanPowerPlus-A-ALDH-3/4IN-FNPT-BVRequired2pcs required per set of ADP Kits. These valves are used for servicing purposes and flow balancing of each collector bank.
FlowMaxx-A-LRG-CLAMP-LINESETRecommendedUsed to support line set (5/8” – 1” line set). Includes lag bolt, and EPDM / flashing washer for water sealing.
FlowMaxx-A-N66BUV-18INRecommendedUL listed outdoor heavy duty line set and cable supports. Allows for effective, and low cost fastening which meets building code requirements.

Replacement Parts & Safety

ItemQtyDescription
ProtectMaxx-GLYCOL-FG-50PCT-5GNAHigh temp solar glycol, required to not void collector warranty. Pre-mixed to 50%.
FlowMaxx-A-3/4IN-3/4IN-PF-MNAUsing full port ball valve above, use ¾” quick connects, to connect line set directly into the collector bank.

Mounting Options

Flush Mounting on Asphalt Roof or Metal Roof

ItemQtyDescription
ConnectMaxx-TPALDH29-2FM-V3 or ConnectMaxx-TPALDH29-2FM-V22 or 1Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Base mounting aluminum rail or Base mounting rail kit + shafer roof lags. Note the V2 kit includes all hardware required to connect from collectors frame to the roof.
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.
ConnectMaxx-TRUV-AS-MLLFLASH-KIT6When mounting on asphalt or metal roof, where normal shafer bolts from above V2 mounting kit are too wide for rafter. Normal installation on purlin / residential roof.

Flush Mounting on Tile Roof

ItemQtyDescription
ConnectMaxx-TPALDH29-2FM-V3 or ConnectMaxx-TPALDH29-2FM-V22 or 1Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Base mounting aluminum rail or Base mounting rail kit*.Note, some hardware from V2 kit will not be used for mounting to tile roofs (pending installation method).
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.
ConnectMaxx-UV-QMUTM-TILE-V26Allows for mounting to all tile roof types.
XMaxx-HW-M8-40mm-TBolt12T bolts for interconnecting rails
ConnectMaxx-TRHW-M8-HEXNUT12HEXNuts for tbolts

Free Standing Mounting

ItemQtyDescription
ConnectMaxx-TPALDH29-2FS-V21Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Free standing mounting kit. Includes all components for “A-Frame”. Does not include lag bolts for connection into roof material.
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.

Or

ItemQtyDescription
ConnectMaxx-TRUV-1FS-FTLEG-V32Mounting kit for (2) collectors. Mounting hardware for (1) collector not sold. Front Leg for incline mounting kit (includes lag bolt for roof).
ConnectMaxx-TRUV-1FS-BLEG-V32Rear Leg for incline mounting kit (includes lag bolt for roof).
XMaxx-HW-PLS30-Caulk1Rated roof sealant for sealing all roof penetrations.

Product Documents

Document TypeDownload
DatasheetView Datasheet
SRCC CertificationView SRCC Certification
Install Manual (General)View Install Manual (General)
WarrantyView Warranty
Technical ManualView Technical Manual

Additional Related Resources

Product Press Releases

  • There Are No Press Releases To Display

Product Featured Projects

  • There Are No Featured Projects To Display

Tell Us What You Think!







Expected Timeline to purchase?:

Customer Type:

 

Please help us fight spam! What is the sum of 7 + 4?

 
Contact SunMaxx Solar SunMaxx Solar
Sales & Main Office
Rte 206
Bainbridge, NY 13733

P: 1.877.SUNMAXX
P: 1.877.786.6299
www.SunMaxxSolar.com