How to calculate what type and how many mounting kits you need:
1. Determine the roof material you are mounting on
2. Determine how many solar collectors you need
3. Determine what is your rafter spacing
4. Click ‘Next’ to see the type and quantity of your mounting hardware.
5. Add these items to your cart to order
Want to learn more?
Below are a few different ways to mount your TitanPowerPlus ALDH29-V3 Collector. All mounting accessories below are manufactured in Upstate New York. If you have a custom mounting requirement, just let us know! We have a custom machine shop to handle most custom project requirements.
How to select the right mounting hardware:
1. Determine the roof material you are mounting on
2. Determine how many solar collectors you need
3. Use the sizing table located in SunMaxx Solar Collector Mounting System Datasheet.
4. Add the parts below according to your roof material, desired mounting angle.
Flush Mounting on Asphalt Roof or Metal Roof
Sets required to mount you flat plate collector on asphalt or metal roof:
Mounting set product code:
ConnectMaxx-UV-AS-LBASEKIT (Asphalt Roof)
ConnectMaxx-UV-M-LBASEKIT (Metal Roof)
| List of components included in a single set | Quantity |
| L-bracket | 1 |
| EPDM Washer | 1 |
| Flashing (only in Asphalt Roof Kit) | 1 |
| 3/8” (9.5 mm) Lag bolt | 1 |
| 3/8” (9.5 mm) Lock Nut | 1 |
Mounting set product code: |
| List of components included in a single set | Quantity |
| Clamping Plate | 1 |
| 1/4” (6 mm) Bolt | 1 |
| 1/4” (6 mm) Nut | 1 |
| 1/4” (6 mm) Washer | 1 |
Flush Mounting on Tile Roof
Sets required to mount you flat plate collector on a tile roof:
Mounting set product code:
ConnectMaxx-UV-W-QMUTM-TILE-5IN-V2-BASEKIT (Wooden Purlin)
ConnectMaxx-UV-M-QMUTM-TILE-5IN-V2-BASEKIT (Metal Purlin)
| List of components included in a single set | Quantity |
QBase:
| 1 of each part |
| L-bracket | 1 |
| 3/8” (9.5 mm) Lock Nut | 1 |
Mounting set product code: |
| List of components included in a single set | Quantity |
| Clamping Plate | 1 |
| 1/4” (6 mm) Bolt | 1 |
| 1/4” (6 mm) Nut | 1 |
| 1/4” (6 mm) Washer | 1 |
Flat Roof Free Standing Mounting
Sets required to mount you flat plate collector in standing position on a flat roof:
Mounting set product code:
ConnectMaxx-UV-W-QMUTM-STAND-5IN-V2 (Wooden Purlin)
ConnectMaxx-UV-M-QMUTM-STAND-5IN-V2 (Metal Purlin)
| List of components | Quantity |
QBase:
| 2 of each |
| L-bracket | 2 |
| Lag screw | 4 |
| 3/8” (9.5 mm) Lock Nut | 2 |
Mounting set product code: |
| List of components | Quantity |
| Universal A-frame | 1 |
Mounting set product code: |
| List of components included in a single set | Quantity |
| Clamping Plate | 1 |
| 1/4” (6 mm) Bolt | 1 |
| 1/4” (6 mm) Nut | 1 |
| 1/4” (6 mm) Washer | 1 |
Ground Free Standing Mounting
Sets required to mount you flat plate collector in standing position on a ground:
Mounting set product code: |
| List of components included in a single set | Quantity |
| 3/8" x 3-3/4" Seismic Anchor | 2 |
| Ballast block | 1 |
| Universal A-frame | 1 |
| 3/8” (9.5 mm) Locknut | 2 |
Mounting set product code: |
| List of components included in a single set | Quantity |
| Clamping Plate | 1 |
| 1/4” (6 mm) Bolt | 1 |
| 1/4” (6 mm) Nut | 1 |
| 1/4” (6 mm) Washer | 1 |