How to calculate what type and how many mounting kits you need:
1. Determine the roof material you are mounting on
2. Determine how many solar collectors you need
3. Determine what is your rafter spacing
4. Click ‘Next’ to see the type and quantity of your mounting hardware.
5. Add these items to your cart to order
Want to learn more?
Below are a few different ways to mount your ThermoPower VTS Series Collector. All mounting accessories below are manufactured in Upstate New York. If you have a custom mounting requirement, just let us know! We have a custom machine shop to handle most custom project requirements.
How to select the right mounting hardware:
1. Determine the roof material you are mounting on
2. Determine how many solar collectors you need
3. Use the sizing table located in SunMaxx Solar Collector Mounting System Datasheet.
4. Add the parts below according to your roof material, desired mounting angle.
Flush Mounting on Asphalt Roof or Metal Roof
Sets required to mount you evacuated tube collector on asphalt or metal roof:
Mounting set product code: |
List of components included in a single set | Quantity |
L-bracket | 1 |
EPDM Washer | 1 |
Flashing (only in Asphalt Roof Kit) | 1 |
3/8” (9.5 mm) Lag bolt | 1 |
3/8” (9.5 mm) Lock Nut | 1 |
Mounting set product code: |
List of components included in a single set | Quantity |
L-bracket | 1 |
3/8” (9.5 mm) Bolt | 1 |
3/8” (9.5 mm) Nut | 1 |
3/8” (9.5 mm) Washer | 1 |
1/4” (6 mm) Bolt | 1 |
1/4” (6 mm) Nut | 1 |
1/4” (6 mm) Washer | 1 |
Flush Mounting on Tile Roof
Sets required to mount you evacuated tube collector on a tile roof:
Mounting set product code:
ConnectMaxx-UV-W-QMUTM-TILE-5IN-V2-BASEKIT (Wooden Purlin)
ConnectMaxx-UV-M-QMUTM-TILE-5IN-V2-BASEKIT (Metal Purlin)
List of components included in a single set | Quantity |
QBase:
| 1 of each part |
L-bracket | 1 |
3/8” (9.5 mm) Lock Nut | 1 |
Lag screw | 2 |
Mounting set product code: |
List of components included in a single set | Quantity |
L-bracket | 1 |
3/8” (9.5 mm) Bolt | 1 |
3/8” (9.5 mm) Nut | 1 |
3/8” (9.5 mm) Washer | 1 |
1/4” (6 mm) Bolt | 1 |
1/4” (6 mm) Nut | 1 |
1/4” (6 mm) Washer | 1 |