Is it possible to melt snow off of my collectors?
Yes it is. Depending on your type of collector, you can program your controller to manually activate the circulator which will bring heat from your storage vessel and into the collectors, which will radiate that heat back out thus melting the snow. This method only works for FLAT PLATES however...
How do I know which type of storage tank that I need?
Well, there are really two main options here; pressurized tank or non-pressure tank. The pressure tank will come with heat exchange coils on the inside (2 or 3 depending on style) that will be tied into a closed solar loop and open DHW loop. The additional coil (s) can be used...
How do I know which size of storage tank I need?
There are many answers to this question but it really boils down to this...you need the one that best suits your application, your solar collector field, your budget and your available space. If you use a Heliomaxx kits from Sunmaxx, we have sized the storage vessels relative to the size of...
How long does it usually take to install a typical Solar Hot Water System?
Well, this all depends on many things. But for an average home with average difficulty level and experienced installer shouldnt take much more than two full days. I have seen some that were installed by two men in one full day and others that take a week. If you are...
How long does it usually take to install a prepackaged DHW kit?
Well, that all depends but usually 2 workers can install a simple DHW kit and have it fully commissioned within 3 days. There are some cases where only 2 days is required and some days more. Our Heliomaxx kits are designed for simplicity and we expect that you shouldn't really...
Do I have to run the piping through the roof?
No, you do not have to. You can, and should, use flexible stainless steel piping which allows you to direct the piping anywhere you want with very little trouble. Many installers will choose to send the piping the ;ong way around just to avoid a roof penetration. While this works...
Do I need any experience in electricity to install a solar water heater?
No, you do not. In fact, if you purchase a pre-packaged kit from Sunmaxx, the pump station (which is has the controller and pump built in) simply has a 3-prong plug that you insert right into a 110v wall outlet. The only thing that you would need to do is...
How do I know if my system is performing the way it should be?
First of all, your system performance will be measured by BTU'S produced, NOT by temperature achieved. The simplest way to accomplish this is by following this method: 1- Record your solar tank temperature first thing in the morning, before the solar pump turns on. 2- be sure that no one uses hot...
What is NABCEP and why is it important?
The North American Board of Certified energy Practitioners is a standard of excellence for Solar Installers. Anyone who meets the criteria for NABCEP certification meets the most rigorous demands for competency in the US. Being NABCEP certified allow you to gain eligibility to a broader market through incentive based-programs that...
How do I decide between Flat plate and Evacuated tube?
This will be a debate well in to the future. For an more in-depth review please watch this Click here to watch this 1/2 hour webinar. Your decision should be based primarily on the following considerations: 1- Temperature demand- What is you existing application? EVT's will outperform FP's at higher...