SunMaxx Solar Installs Solar Thermal System in Clayton, NY
avwFm87mDz2012-03-13T14:39:50+00:00In 2009, a residential Solar Thermal System was installed in Clayton, NY using 6 of SunMaxx Solar's SM-30 Evacuated Tubes. The system, which was designed by Owen Pugh, President at Alternative Power Solutions, was a STSS 415 gallon tank with multiple submerged coils. The collector installation included Roof-mounted SunMaxx Solar racking system, using a closed loop, propylene glycol freeze control and STSS Energy Management Control.
Part 1 of the SunMaxx Commissioning Series: The Thermal Filling Station
avwFm87mDz2012-03-12T14:39:58+00:00
SunMaxx Solar and Tiger Electric, Inc. Install Solar Thermal System at Rancho Clancy
avwFm87mDz2012-03-09T13:24:57+00:00In 2012 , SunMaxx Solar in conjunction with Tiger Electric, Inc. completed a Solar installation at Rancho Clancy in Rancho Mirage, California . The Installation, which was contracted, designed and installed by Michael R. Ditsler of Tiger Electric, Inc., purchased seven SunMaxx Solar Evacuated Tube Collectors for a supplemental pool heating system on the residential estate. The ballasted Utility Scale PV ground mount racking system holds approximately 64,000 lbs. of pre-cast concrete ballast block. The Solar Thermal Evacuated Tube system, which is the primary heating source for the homeowners’ pool, is piped underground to a cupro nickel heat exchanger located adjacent to the pool filter and pump systems 120LF away from the collector field. High temperature and demand protection is offered though an open system employing a dump back tank and dual taco pumps for supply and return, as the collector field and dump back tank sit 30″ below the level of the heat exchanger. All exposed piping has been insulated with an industrial grade aluminum covered insulation. In conjunction with the 20KW AC PV system, Tiger Electric, Inc. was able to re-size and utilize a retention basin that would have otherwise been unused or wasted space. Control for the primary SEVT System and the secondary natural gas fired pool heating system are prioritized by temperature using a mixing valve.Michael R. Ditsler of Tiger Electric comments, “The Solar install at Rancho Clancy further aids in the property’s green energy initiatives, and we couldn’t be happier with SunMaxx Solar’s industry leading products which allowed for a successful design.” The installation took 10 days total of construction time to finish and a YouTube video of the Solar Installation can be viewed at http://www.youtube.com/watch?v=_TJiMG6lAG4.
SunMaxx Solar Installs Solar Thermal System at Rancho Clancy in Rancho Mirage, California
avwFm87mDz2012-03-09T12:57:32+00:00FOR IMMEDIATE RELEASE –March 9, 2010 – Binghamton , NY – SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce the installation of a solar thermal system at Rancho Clancy in Rancho Mirage, California. Prestigious Rancho Clancy is a residential, single family property in the heart of Rancho Mirage, California. The custom home is situated on one acre in the Rancho Clancy development. The Solar installation, which was contracted, designed and installed by Michael R. Ditsler of Tiger Electric, Inc., purchased seven SunMaxx Solar Evacuated Tube Collectors for a supplemental pool heating system on the residential estate. The ballasted Utility Scale PV ground mount racking system holds approximately 64,000 lbs. of pre-cast concrete ballast block. The Solar Thermal Evacuated Tube system, which is the primary heating source for the homeowners' pool, is piped underground to a cupro nickel heat exchanger located adjacent to the pool filter and pump systems 120LF away from the collector field. High temperature and demand protection is offered though an open system employing a dump back tank and dual taco pumps for supply and return, as the collector field and dump back tank sit 30" below the level of the heat exchanger. All exposed piping has been insulated with an industrial grade aluminum covered insulation. In conjunction with the 20KW AC PV system, Tiger Electric, Inc. was able to re-size and utilize a retention basin that would have otherwise been unused or wasted space. Control for the primary SEVT System and the secondary natural gas fired pool heating system are prioritized by temperature using a mixing valve. The installation took 10 days total of construction time to finish and a YouTube video of the Solar Installation can be viewed at . Michael R. Ditsler of Tiger Electric comments, “ The Solar install at Rancho Clancy further aids in the property's green energy initiatives, and we couldn't be happier with SunMaxx Solar’s industry leading products which allowed for a successful design.” SunMaxx Solar will continue to develop and help procure the installation of solar thermal systems at residential estates across the nation. Adam Farrell, CEO of SunMaxx Solar comments, “We are thrilled that our partnership with Tiger Electric Inc. has proven another successful SunMaxx Solar installation .” SunMaxx Solar aims to build a sustainable future for our global community and is proud that the company's installations greatly contribute to reducing the carbon footprint. In today’s energy consuming world, SunMaxx offers world-class solar energy and renewable products, striving to meet the increasing need for alternative energy sources.
SunMaxx Solar Launches Ballast Tray System
avwFm87mDz2012-03-02T15:32:14+00:00FOR IMMEDIATE RELEASE – March 2, 2012 – Binghamton, NY – SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce that the solar industry leader has launched a new Ballast Tray System. The SunMaxx Solar Ballast Tray System fits all major solar modules and provides a reliable and long-lasting method to mount flat plates, evacuated tubes, or photovoltaic collectors to a flat roof without any penetrations to the roofing membrane. The ballast trays distribute weight over a large surface area providing for a lower roof load per square foot. Aluminum and stainless steel components are rust resistant to provide years of maintenance-free service. EPDM rubber pads on the bottom of the system increase friction and prevent roof surface abrasion. The trays hold standard 8 x 16 x 1-7/8" size blocks, which you can source locally. With these blocks in place in the ballast tray system, you can safely anchor your solar collectors without compromising the roofing membrane. One tray can hold 9 blocks weighing 15 lbs. each for a total of 147 lbs. per tray. Two SunMaxx TitanPower SU2 or 2.4 flat plate collectors can have up to 4 trays attached for a total of 588 lbs. between the two collectors. The low profile presents an aesthetically pleasing roof landscape. The simple design ensures quick, and therefore, low cost installation. The adaptable system works with flat plate, evacuated tube, and photovoltaic collectors. SunMaxx Solar Ballast Trays can be mounted on either or both sides of the rails, depending on the weight needed for the wind load. The ballast trays can accommodate custom designs for any size project. “The new offerings expand SunMaxx Solar's broad array of products and services into the solar market,” states Adam Farrell, CEO of SunMaxx Solar. “We are excited to introduce our new Ballast Tray system, which provides greater multifaceted green options to our customers.” SunMaxx Solar's Ballast Tray system is proudly made in the U.S.A. For more information, contact [email protected].
SunMaxx Solar Launches New Solar Grade Glycol XT
avwFm87mDz2012-03-02T15:04:32+00:00FOR IMMEDIATE RELEASE – March 2, 2012 – Binghamton, NY – SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce that the solar industry leader has launched a custom Glycol XT. SunMaxx Solar's custom solar-formula Glycol XT is a 50/50 mixture of 1,3-Propanediol and water. With a long list of advantages, including a lower price, this heat transfer fluid has a higher thermal conductivity than standard propylene glycol, while maintaining the original’s very low toxicity. SunMaxx Glycol XT also has a greater temperature range than standard propylene glycol. It can go just as low without freezing to -17°F (-27°C), and can withstand temperatures as high as 349°F (176°C) without breaking down. In addition to all its other good features, Glycol XT is also a very green product. Unlike typical propylene or ethylene glycols, which are made from foreign oil or natural gas, SunMaxx Solar Glycol XT is made from sustainable, bio-based raw materials. And production emits 40% less green house gas and uses 20% less energy to produce than standard propylene glycol. SunMaxx Solar CEO Adam Farrell notes, “No other brand of glycol can beat this level of performance for solar thermal use. This environmentally friendly product is our solar glycol of choice for thermal transfer. XT works perfectly in solar thermal systems, and provides a more efficient option than does normal propylene glycol.” SunMaxx Solar Glycol XT is proudly made in the U.S.A. and, best of all, it’s 100% renewable. For more information contact [email protected].