New SunMaxx Solar Products

SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce that the solar industry leader has launched a custom Glycol XT. SunMaxx Solar’s custom solar-formula Glycol XT is a 50/50 mixture of 1,3-Propanediol and water. With a long list of advantages, including a lower price, this heat transfer fluid has a higher thermal conductivity than standard propylene glycol, while maintaining the original’s very low toxicity. SunMaxx Glycol XT also has a greater temperature range than standard propylene glycol. It can go just as low without freezing to -17°F (-27°C), and can withstand temperatures as high as 349°F (176°C) without breaking down. In addition to all its other good features, Glycol XT is also a very green product. Unlike typical propylene or ethylene glycols, which are made from foreign oil or natural gas, SunMaxx Solar Glycol XT is made from sustainable, bio-based raw materials. And production emits 40% less green house gas and uses 20% less energy to produce than standard propylene glycol. For more information: https://www.sunmaxxsolar.com/SunMaxx-Solar-Launches-New-Solar-Grade-Glycol-XT.php

Binghamton, NY – SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce that the solar industry leader has launched a new Ballast Tray System. The SunMaxx Solar Ballast Tray System fits all major solar modules and provides a reliable and long-lasting method to mount flat plates, evacuated tubes, or photovoltaic collectors to a flat roof without any penetrations to the roofing membrane. The ballast trays distribute weight over a large surface area providing for a lower roof load per square foot. Aluminum and stainless steel components are rust resistant to provide years of maintenance-free service. EPDM rubber pads on the bottom of the system increase friction and prevent roof surface abrasion. The trays hold standard 8 x 16 x 1-7/8″ size blocks, which you can source locally. With these blocks in place in the ballast tray system, you can safely anchor your solar collectors without compromising the roofing membrane. One tray can hold 9 blocks weighing 15 lbs. each for a total of 147 lbs. per tray. Two SunMaxx TitanPower SU2 or 2.4 flat plate collectors can have up to 4 trays attached for a total of 588 lbs. between the two collectors. The low profile presents an aesthetically pleasing roof landscape. The simple design ensures quick, and therefore, low cost installation. The adaptable system works with flat plate, evacuated tube, and photovoltaic collectors. SunMaxx Solar Ballast Trays can be mounted on either or both sides of the rails, depending on the weight needed for the wind load. The ballast trays can accommodate custom designs for any size project. For more information: https://www.sunmaxxsolar.com/SunMaxx-Solar-Launches-Ballast-Tray-System.php

SunMaxx Solar, a leading, vertically integrated manufacturer of solar thermal systems and components, is pleased to announce that the company now manufactures non-pressure storage tanks out of their Binghamton, New York facility ! SunMaxx manufactures a variety of solar hot water storage tanks designed for commercial and government installations. Combining both European and U.S. technology, the new tanks store large amounts of solar energy at lower temperatures, which will reduce costs and improve quality and overall performance of the solar systems. The non pressure storage tanks are the perfect combination of collapsible water tanks and low temperature heat exchanger coils , and can be used in conjunction with wood boilers. Delivered folded via flate crate, SunMaxx non pressure tanks boast easy installation and one hour piping time . The commercial non pressurized tanks do not require ASTM or ASME certification and are available to order for shipping worldwide. SunMaxx offers tank sizes that range from 200 gallons to over 5,000 gallons and the company policy states that it will match any competitor quote and beat it by 5% . For More information: https://www.sunmaxxsolar.com/sunmaxx-solar-announces-solar-thermal-storage-tank-manufacturing-facility-in-binghamton-ny/